Error

This module includes error definitions used in OpenThread.

Summary

Enumerations
otError{ OT_ERROR_NONE = 0, OT_ERROR_FAILED = 1, OT_ERROR_DROP = 2, OT_ERROR_NO_BUFS = 3, OT_ERROR_NO_ROUTE = 4, OT_ERROR_BUSY = 5, OT_ERROR_PARSE = 6, OT_ERROR_INVALID_ARGS = 7, OT_ERROR_SECURITY = 8, OT_ERROR_ADDRESS_QUERY = 9, OT_ERROR_NO_ADDRESS = 10, OT_ERROR_ABORT = 11, OT_ERROR_NOT_IMPLEMENTED = 12, OT_ERROR_INVALID_STATE = 13, OT_ERROR_NO_ACK = 14, OT_ERROR_CHANNEL_ACCESS_FAILURE = 15, OT_ERROR_DETACHED = 16, OT_ERROR_FCS = 17, OT_ERROR_NO_FRAME_RECEIVED = 18, OT_ERROR_UNKNOWN_NEIGHBOR = 19, OT_ERROR_INVALID_SOURCE_ADDRESS = 20, OT_ERROR_ADDRESS_FILTERED = 21, OT_ERROR_DESTINATION_ADDRESS_FILTERED = 22, OT_ERROR_NOT_FOUND = 23, OT_ERROR_ALREADY = 24, OT_ERROR_IP6_ADDRESS_CREATION_FAILURE = 26, OT_ERROR_NOT_CAPABLE = 27, OT_ERROR_RESPONSE_TIMEOUT = 28, OT_ERROR_DUPLICATED = 29, OT_ERROR_REASSEMBLY_TIMEOUT = 30, OT_ERROR_NOT_TMF = 31, OT_ERROR_NOT_LOWPAN_DATA_FRAME = 32, OT_ERROR_LINK_MARGIN_LOW = 34, OT_ERROR_INVALID_COMMAND = 35, OT_ERROR_PENDING = 36, OT_NUM_ERRORS, OT_ERROR_GENERIC = 255 }	enum This enumeration represents error codes used throughout OpenThread.

Enumerations

otError{
  OT_ERROR_NONE = 0,
  OT_ERROR_FAILED = 1,
  OT_ERROR_DROP = 2,
  OT_ERROR_NO_BUFS = 3,
  OT_ERROR_NO_ROUTE = 4,
  OT_ERROR_BUSY = 5,
  OT_ERROR_PARSE = 6,
  OT_ERROR_INVALID_ARGS = 7,
  OT_ERROR_SECURITY = 8,
  OT_ERROR_ADDRESS_QUERY = 9,
  OT_ERROR_NO_ADDRESS = 10,
  OT_ERROR_ABORT = 11,
  OT_ERROR_NOT_IMPLEMENTED = 12,
  OT_ERROR_INVALID_STATE = 13,
  OT_ERROR_NO_ACK = 14,
  OT_ERROR_CHANNEL_ACCESS_FAILURE = 15,
  OT_ERROR_DETACHED = 16,
  OT_ERROR_FCS = 17,
  OT_ERROR_NO_FRAME_RECEIVED = 18,
  OT_ERROR_UNKNOWN_NEIGHBOR = 19,
  OT_ERROR_INVALID_SOURCE_ADDRESS = 20,
  OT_ERROR_ADDRESS_FILTERED = 21,
  OT_ERROR_DESTINATION_ADDRESS_FILTERED = 22,
  OT_ERROR_NOT_FOUND = 23,
  OT_ERROR_ALREADY = 24,
  OT_ERROR_IP6_ADDRESS_CREATION_FAILURE = 26,
  OT_ERROR_NOT_CAPABLE = 27,
  OT_ERROR_RESPONSE_TIMEOUT = 28,
  OT_ERROR_DUPLICATED = 29,
  OT_ERROR_REASSEMBLY_TIMEOUT = 30,
  OT_ERROR_NOT_TMF = 31,
  OT_ERROR_NOT_LOWPAN_DATA_FRAME = 32,
  OT_ERROR_LINK_MARGIN_LOW = 34,
  OT_ERROR_INVALID_COMMAND = 35,
  OT_ERROR_PENDING = 36,
  OT_NUM_ERRORS,
  OT_ERROR_GENERIC = 255
}

enum

This enumeration represents error codes used throughout OpenThread.

Typedefs
`otError`	typedef `enum otError` This enumeration represents error codes used throughout OpenThread.

Functions
`otThreadErrorToString(otError aError)`	`const char *` This function converts an otError enum into a string.

Enumerations

otError

 otError

This enumeration represents error codes used throughout OpenThread.

Properties
`OT_ERROR_ABORT`	Operation was aborted.
`OT_ERROR_ADDRESS_FILTERED`	Received a frame filtered by the address filter (allowlisted or denylisted).
`OT_ERROR_ADDRESS_QUERY`	Address resolution requires an address query operation.
`OT_ERROR_ALREADY`	The operation is already in progress.
`OT_ERROR_BUSY`	Service is busy and could not service the operation.
`OT_ERROR_CHANNEL_ACCESS_FAILURE`	A transmission could not take place due to activity on the channel, i.e., the CSMA-CA mechanism has failed (IEEE 802.15.4-2006).
`OT_ERROR_DESTINATION_ADDRESS_FILTERED`	Received a frame filtered by the destination address check.
`OT_ERROR_DETACHED`	Not currently attached to a Thread Partition.
`OT_ERROR_DROP`	Message was dropped.
`OT_ERROR_DUPLICATED`	Received a duplicated frame.
`OT_ERROR_FAILED`	Operational failed.
`OT_ERROR_FCS`	FCS check failure while receiving.
`OT_ERROR_GENERIC`	Generic error (should not use).
`OT_ERROR_INVALID_ARGS`	Input arguments are invalid.
`OT_ERROR_INVALID_COMMAND`	Input (CLI) command is invalid.
`OT_ERROR_INVALID_SOURCE_ADDRESS`	Received a frame from an invalid source address.
`OT_ERROR_INVALID_STATE`	Cannot complete due to invalid state.
`OT_ERROR_IP6_ADDRESS_CREATION_FAILURE`	The creation of IPv6 address failed.
`OT_ERROR_LINK_MARGIN_LOW`	The link margin was too low.
`OT_ERROR_NONE`	No error.
`OT_ERROR_NOT_CAPABLE`	Operation prevented by mode flags.
`OT_ERROR_NOT_FOUND`	The requested item could not be found.
`OT_ERROR_NOT_IMPLEMENTED`	Function or method is not implemented.
`OT_ERROR_NOT_LOWPAN_DATA_FRAME`	Received a non-lowpan data frame.
`OT_ERROR_NOT_TMF`	Message is not a TMF Message.
`OT_ERROR_NO_ACK`	No acknowledgment was received after macMaxFrameRetries (IEEE 802.15.4-2006).
`OT_ERROR_NO_ADDRESS`	Address is not in the source match table.
`OT_ERROR_NO_BUFS`	Insufficient buffers.
`OT_ERROR_NO_FRAME_RECEIVED`	No frame received.
`OT_ERROR_NO_ROUTE`	No route available.
`OT_ERROR_PARSE`	Failed to parse message.
`OT_ERROR_PENDING`	Special error code used to indicate success/error status is pending and not yet known.
`OT_ERROR_REASSEMBLY_TIMEOUT`	Message is being dropped from reassembly list due to timeout.
`OT_ERROR_RESPONSE_TIMEOUT`	Coap response or acknowledgment or DNS, SNTP response not received.
`OT_ERROR_SECURITY`	Security checks failed.
`OT_ERROR_UNKNOWN_NEIGHBOR`	Received a frame from an unknown neighbor.
`OT_NUM_ERRORS`	The number of defined errors.

Typedefs

otError

enum otError otError

This enumeration represents error codes used throughout OpenThread.

Functions

otThreadErrorToString

const char * otThreadErrorToString(
  otError aError
)

This function converts an otError enum into a string.

Details

Parameters

[in] aError

An otError enum.

Returns

A string representation of an otError.