[![](https://openthread.io/static/images/icon-github.svg)View source on GitHub](https://github.com/openthread/ot-docs/tree/main/site/en/guides/border-router/serial-cables.md)
![Texas Instruments](https://openthread.io/static/images/contributors/ot-byline-ti.png) **By** [Duane
Ellis](https://github.com/DuaneEllis-TI) Contributor from Texas Instruments

Use a USB serial cable to connect to your Border Router serial port for
debugging purposes.

## BeagleBone Black

The BeagleBone Black (BBB) uses the following serial port settings:

- Baudrate: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1

Recommended cables:

- [Adafruit USB to TTL Serial Cable](https://www.adafruit.com/product/954)
- [FTDI USB to TTL Serial 3.3V
  Cable](https://www.digikey.com/products/en?keywords=768-1015-ND)

### How to connect

For detailed information on connecting serial cables to the BBB, see the
[Beagleboard Wiki](https://elinux.org/Beagleboard:BeagleBone_Black_Serial). For
both cables, the black wire should be connected to Pin 1 (GND), which is
closest to the Ethernet port.

> [!WARNING]
> **Warning:** To avoid hardware damage, always ensure cables are properly connected before use.

[![BeagleBone Black Adafruit](https://openthread.io/guides/images/otbr-cables-adafruit.png)](https://openthread.io/guides/images/otbr-cables-adafruit.png)Adafruit serial cable

<br />


[![BeagleBone Black FTDI](https://openthread.io/guides/images/otbr-cables-ftdi.png)](https://openthread.io/guides/images/otbr-cables-ftdi.png)FTDI serial cable

<br />

## Raspberry Pi

The Raspberry Pi (RPi) uses the following serial port settings:

- Baudrate: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1

Recommended cable: [Adafruit USB to TTL Serial
Cable](https://www.adafruit.com/product/954)

To learn how to connect and enable the serial console on your RPi, see
[Adafruit's Using a Console Cable guide](https://learn.adafruit.com/adafruits-raspberry-pi-lesson-5-using-a-console-cable/overview).