[![](https://openthread.io/static/images/icon-github.svg)View source on GitHub](https://github.com/openthread/ot-docs/tree/main/site/en/guides/border-router/external-commissioning/join.md)

After externally commissioning a device using the [OT Commissioner CLI](https://openthread.io/guides/border-router/external-commissioning/cli),
a Joiner is ready to join the Thread network.

## Join the network

On the Joiner device, start the Thread protocol to automatically join the
network.

    thread start
    Done

Check the state after a few moments to confirm. It may initially start as a
child, but within two minutes it should upgrade to a router.

    state
    router
    Done

Also check the device's IPv6 addresses. It should have a Global address using
the On-Mesh Prefix specified during formation of the Thread network through the
OTBR Web GUI.

    ipaddr
    fdde:ad11:11de:0:0:ff:fe00:9400
    fd11:22:0:0:3a15:3211:2723:dbe1 #Global address with on-mesh prefix
    fe80:0:0:0:6006:41ca:c822:c337
    fdde:ad11:11de:0:ed8c:1681:24c4:3562

## Ping the external internet

Test the connectivity between the Joiner device in the Thread network and the
external internet by pinging a public IPv4 address.

    ping 8.8.8.8
    Pinging synthesized IPv6 address: fd4c:9574:3720:2:0:0:808:808
    16 bytes from fd4c:9574:3720:2:0:0:808:808: icmp_seq=15 hlim=119 time=48ms
    1 packets transmitted, 1 packets received. Packet loss = 0.0%. Round-trip min/avg/max = 48/48.0/48 ms.
    Done

> [!NOTE]
> **Note:** NAT64 needs to be functional in order to be able to ping IPv4 addresses. For more information on NAT64, see the related codelab [Thread Border Router - Provide Internet access via NAT64](https://openthread.io/codelabs/openthread-border-router-nat64).